Lego Jurassic World Red Bricks Locations Guide

Our Lego Jurassic World Red Bricks Locations Guide shows you how to find and/or unlock all 20 Lego Jurassic World Red Bricks locations in the PS3, PS4, Xbox 360, Xbox One, Wii U, PC, 3DS & PS Vita action-adventure game.

Here are all Stud Multiplier Red Brick locations. Check below for all 20 Red Bricks!

Tip: Go and buy the “Studs x2” Red Brick first or unlock it for free with the “5MZ73E” cheat. It’ll make it a lot easier to get enough Studs together to buy all the other Red Bricks.

Index of Lego Jurassic World Guides:

Table of Contents

Lego Jurassic World Red Bricks Locations Guide

Click on any of these Red Brick location thumbnails to see the full-size picture gallery:


[NOTE: This guide is now 100% finished with all red brick locations discovered!]

How to find Red Bricks: The Red Power Bricks are now also known as “Red Bricks”. When you find them in the four open world HUB areas (one area for each of the four movies covered in this game), then you can buy it off of either of the two Red Brick Stations AKA Holoscape Terminals (one on each island). Namely in the Visitor Center on Isla Nublar or in the Innovation Center on Isla Sorna.

But the Red Bricks aren’t simply lying around the four open world HUB areas. Instead, you’ll have to seek out Red Brick challenges in each area. You can find out where they are by looking at the map information kiosks with the blue circle & white letter i on them, which when interacted with show an overview of the area on their screen. This overview will indicate each Red Brick challenge starting location with a red “Red Brick” icon.

Scroll down on this page for full instructions on how to get all Red Bricks in Lego Jurassic World.

Lego Jurassic World where to buy Red Bricks
Buying Red Bricks is done in the Visitor Center on Isla Nublar or the Innovation Center on Isla Sorna

Where to buy the unlocked Red Bricks?: Quite a few people have asked “Where’s the Red Brick Station?”, since it’s the location where you go to to buy the Red Bricks, so here it is…

First off, when you just start the game it won’t be available yet. After playing the first level (Level 1: Prologue) a helicopter will take you to the open world HUB island for Jurassic Park 1 and Jurassic World (on the island Isla Nublar).

#1. When you’re on Jurassic Park 1 & Jurassic World’s Isla Nublar (the left island), by selecting the yellow Jurassic Park 1 logo from the top-left side of the map screen, then go to the Visitor Center. The Visitor Center is the large grey museum building and its Red Brick Station screen is located right by the building’s entrance (to the right once you’re inside).

#2. When you’re on The Lost World: Jurassic Park & Jurassic Park 3’s Isla Sorna (the right island), then go to the Innovation Center.

Buying Red Bricks there will unlock new cheats you can then activate via the game’s pause menu by going to “Extras” and turning on the cheat(s) you want; and you can turn them off again too.

This video guide shows how to walk to Isla Nublar’s Visitor Center to buy Red Bricks:

How to activate Red Brick cheats?: In case you don’t feel like finding every Red Brick in the game, you can use simple cheat codes too (none available yet). To turn on cheat codes, you first have to be in-game. Next, during gameplay press pause. Like in every Lego game you can enter codes from the Main Menu by selecting “Extras” and then “Enter Code”. After which you can activate the cheat (where available). — Remember that the next time you play the game, you’ll have to activate the cheats again.

Lego Jurassic World All Red Bricks
And the Red Brick Station AKA Holoscape Terminal shows all Red Bricks

Tip: After you’ve bought the first score multiplier Red Brick, they will become increasingly expensive. So after you unlock or buy the first “Studs x2” Red Brick for 1 million studs, you can increase your studs total in the open world HUB areas by smashing stuff (like boxes and anything that’s loose on the surface) into studs as you walk across the environments. This is like farming studs, because if you keep traveling back and forth between the four HUB areas the stud-filled items like boxes will keep re-appearing for you to smash!

Protip: Turn on all five stud score multiplier Red Bricks to multiply every single stud you collect times 3840!!

This video guide shows where to find all Red Bricks in Lego Jurassic World:

Timeline in minutes for the Red Bricks Locations Guide Video:
• [00:00] — Its either (not sure which one) Nedry Disguises, 8-Bit Music or Hybrid Disguises Red Brick.
• [02:00] — Its either (not sure which one) Nedry Disguises, 8-Bit Music or Hybrid Disguises Red Brick.
• [03:00] — Score x2 Red Brick.
• [03:40] — Score x8 Red Brick.
• [04:15] — Its either (not sure which one) Nedry Disguises, 8-Bit Music or Hybrid Disguises Red Brick.
• [05:07] — Destroy on Contact Red Brick.
• [06:03] — Compy Mode Red Brick.
• [07:42] — Fast Interact Red Brick.
• [09:35] — Score x10 Red Brick.
• [11:20] — Invincibility Red Brick.
• [13:20] — Score x6 Red Brick.
• [15:34] — Amber Brick Detector Red Brick.
• [19:06] — Fast Build Red Brick.
• [19:48] — Gold Brick Detector Red Brick.
• [21:22] — Score x4 Red Brick.
• [22:29] — Helium Voices Red Brick.
• [23:06] — Red Brick Detector Red Brick.
• [23:37] — Collect Ghost Studs Red Brick.
• [25:01] — Minkit Detector Red Brick.
• [28:01] — Attract Studs Red Brick.

Unlocking the Red Brick Achievement / Trophy:
• Finding and buying all the Red Bricks, and then turning them on, will unlock the “One Big Pile Of Bricks” Achievement / Trophy that’s worth 20 Gamerscore on Xbox systems or a Silver Trophy on PlayStation systems.
• If you turn them all on, or specifically for activating the Stud Magnet Red Brick, you’ll also unlock the “The Concept Of Attraction” Achievement / Trophy that’s worth 10 Gamerscore on Xbox systems or a Bronze Trophy on PlayStation systems.

Red Brick 1: Studs x2

Lego Jurassic World Red Brick 1: Studs x2 Location
Studs x2 Red Brick Location #1: In the “Jurassic Park 1” HUB’s top-left side, at the back of the Visitor Center. Open the garage door’s blue target with Barry’s weapon & walk inside the dark with Ian Malcolm’s flare

Description: This first Red Brick is called “Studs Score Multiplier x2”. This and the other four Stud multipliers are very handy to turn on at the same time at the start of your game, because you’ll make your Stud counter number go up and up and up, so you’ll always have enough Studs to buy characters & vehicles, as well as easily get True Believer status at the end of each level.

Location: You will find this red brick in the “Jurassic Park 1” open world HUB area of Isla Nublar. Which is the left island on the map; you enter the correct area by selecting the yellow Jurassic icon and traveling to the top-left to left side of the map.

This is where you’ll find the Visitor Center, a large dinosaur museum-like grey building. Go to the back of the building to find a gate with a closed garage door on the left side, which you’ll have to open by shooting the blue-colored diamond-shaped target with an electric rifle-carrying character such as Barry from Jurassic World. In the now opened up area you’ll find a darkened garage with the Red Brick inside it. Normal characters are scared of the dark, so you can only walk over to pick it up through this darkness by lighting a flare as any Ian Malcolm character or when using Timmy Murphy’s night vision goggles.

Price: The cost to buy this Red Brick is 1,000,000 studs.

Cheat Code: The code to enter for this Red Brick is “5MZ73E”.

Where exactly to find the Studs x2 Red Brick: It’s shown in this video guide with voice-over directions that lead to the red brick.

Red Brick 2: Studs x4

Lego Jurassic World Red Brick 2: Studs x4 Location
Studs x4 Red Brick Location #2: In the “Jurassic Park 2: The Lost World” HUB’s top side, at the Vehicle Call-In Point. Use it to get a Gyrosphere for the launch pad to throw at the breakable rock revealing a orange rock wall. Then use the Dino Call-In Pad to get a T-Rex to roar to break that final wall

Description: This second Red Brick is called “Studs Score Multiplier x4”.

Location: You will find this red brick in the “Jurassic Park 2: The Lost World” open world HUB area of Isla Sorna. Which is the right island on the map; you enter the correct area by selecting the red The Lost World icon and traveling to the top side of the map.

This is where you’ll find a grey Vehicle Call-In Point pad, use it to bring one of those cool see-through Gyrosphere vehicles to you. Drive it forward to the nearby big blue Dino Call-In Pad (it has a honey-cone structure to it), and in front of that you’ll find a grey launch pad that (when you place your Gyrosphere on it) will slingshot your Gyrosphere into the nearby rock’s brown wall to break it, revealing a orange wall behind it. Now to the Dino Call-In Pad to bring a Tyrannosaurus Rex to you, and use the T-Rex’s scream ability to break the orange wall apart. This will reveal the Red Brick!

Price: The cost to buy this Red Brick is 2,000,000 studs.

Cheat Code: The code to enter for this Red Brick is ?

Where exactly to find the Studs x4 Red Brick: It’s shown in this video guide with voice-over directions that lead to the red brick.

Red Brick 3: Studs x6

Lego Jurassic World Red Brick 3: Studs x6 Location
Studs x6 Red Brick Location #3: In the “Jurassic Park 3” HUB’s top-left side, at the Isla Sorna Aviary. Go down the stairs to the Dino Call-In Pad to get a Pteranodon to fly to the gates structure at the rock-side. Pull the red lever to go inside. After temporarily letting go of the red lever in the middle level the baby can navigate to the bottom level

Description: This third Red Brick is called “Studs Score Multiplier x6”.

Location: You will find this red brick in the “Jurassic Park 3” open world HUB area of Isla Sorna. Which is the right island on the map; you enter the correct area by selecting the red Jurassic icon (not The Lost World icon) and traveling to the top-left side of the map.

This is where you’ll find the round Isla Sorna Aviary building. Walk inside that abandoned building, and in the center you’ll find a stairs down into the Aviary. Once you’re lower in the building follow the path to the big blue Dino Call-In Pad to call for a flying Pteranodon dinosaur.

Fly to the nearby gates on the side of the rocks in the Aviary. Use the Pteranodon talons to pull the red lever up (that controls the elevators) and be transported inside the gate structure to navigate downwards its three levels. Now you’re playing as a Pteranodon baby while the Pteranodon holds the lever. Halfway down the gate structure let go of the red lever and switch back to the baby to go down the newly opened left-side access point, then when you can’t go any further forward on the bottom level’s middle pull the red lever at the top again to open up access to the Red Brick.

Price: The cost to buy this Red Brick is 3,000,000 studs.

Cheat Code: The code to enter for this Red Brick is ?

Where exactly to find the Studs x6 Red Brick: It’s shown in this video guide with voice-over directions that lead to the red brick.

Red Brick 4: Studs x8

Lego Jurassic World Red Brick 4: Studs x8 Location
Studs x8 Red Brick Location #4: In the “Jurassic Park 1” HUB’s right side. Look for a building under construction that has a pipe with rocks in front of it sticking out the wall’s side next to red flowers & a tree. Pachycephalosaurus can crack the grey rocks with its head & then walk inside the darkness with Ian Malcolm’s flare

Description: This fourth Red Brick is called “Studs Score Multiplier x8”.

Location: You will find this red brick in the “Jurassic Park 1” open world HUB area of Isla Nublar. Which is the left island on the map; you enter the correct area by selecting the yellow Jurassic icon and traveling to the top-right to right side of the map.

This is where you’ll find the Herbivore Territory. Travel all the way to the back to the building under construction that has a pipe sticking out the side of a wall. The pipe is in between some red flowers and a tree. You’ll notice that a cracked grey rock is blocking the entrance to the pipe, so you’ll need to break it with a dinosaur that can do that. Switch to either the Pachycephalosaurus with its thick head that can crush the rocks or to a Dilophosaurus that can spit acid to destroy the rocks.

Once the pipe opens up, switch to any character that isn’t afraid of the darkness in the pipe. You’ll want a character who can light up or see in the dark like Timmy Murphy with his night vision goggles or any Ian Malcolm character with his flare. Then once you walk in their special ability will activate and you can walk to the back of the pipe to pick up the Red Brick.

Price: The cost to buy this Red Brick is 4,000,000 studs.

Cheat Code: The code to enter for this Red Brick is ?

Where exactly to find the Studs x8 Red Brick: It’s shown in this video guide with voice-over directions that lead to the red brick.

Red Brick 5: Studs x10

Lego Jurassic World Red Brick 5: Studs x10 Location
Studs x10 Red Brick Location #5: In the “Jurassic World” HUB’s top side, in Indominus Territory. Go to the Dino Call-In Pad there to get Indominus Rex & use its stealth to get past the guarded automatic security gate. Once in, walk forward upto the cage with bars & break the red lock with Indominus’ mouth

Description: This fifth Red Brick is called “Studs Score Multiplier x10”.

Protip: Turn on all five stud score multiplier red bricks to multiply every single stud you collect times 3840!!

Location: You will find this red brick in the “Jurassic World” open world HUB area of Isla Nublar. Which is the left island on the map; you enter the correct area by selecting the blue Jurassic icon and traveling to the top side of the map.

This is where you’ll find the Indominus Territory. Travel all the way to the back to the big blue Dino Call-In Pad to call for a Tyrannosaurus Rex or Indominus Rex (you’ll need a big dino with a strong bite). Near the Dino Call-In Pad you’ll find an electronically guarded gate that closes when the T-Rex or any dinosaur comes near it (as the security camera spots dinosaurs). So you’ll either need to use Indominus Rex’s stealth ability to get through the gate or have T-Rex stand in front of the closed gate and walk a human character into the gate to open it up, thus allowing the T-Rex to walk through before the gate closes.

Once through the guarded gate, walk straight forward until you see the cage with bars that has the Red Brick inside. Use your Rex’s strong bite ability to break through the cage’s red lock with pure strength and then pick up the now-freed Red Brick.

Price: The cost to buy this Red Brick is 5,000,000 studs.

Cheat Code: The code to enter for this Red Brick is ?

Where exactly to find the Studs x10 Red Brick: It’s shown in this video guide with voice-over directions that lead to the red brick.

Red Brick 6: Invincibility

Lego Jurassic World Red Brick 6: Invincibility Location
Invincibility Red Brick Location #6: In the “Jurassic World” HUB’s top side, in the Isla Nublar Aviary. Once through the entrance, use the Dino Call-In Pad to change into a Pteranodon and fly to the red hover switch next to the river. Pull it to start a 1:30 challenge of raising platforms until you’ve pulled all their switches & broke the red brick’s cage

Description: This sixth Red Brick is called “Invincibility” because it makes you impervious to damage. You’ll never have to worry about being hurt by enemies again.

Location: You will find this red brick in the “Jurassic World” open world HUB area of Isla Nublar. Which is the left island on the map; you enter the correct area by selecting the blue Jurassic icon and traveling to the top side of the map.

This is where you’ll find the Isla Nublar Aviary. Walk through the entrance and find the big blue Dino Call-In Pad to call for a Pteranodon to change into that lets you fly to the blue platforms. To start the 1:30 minute challenge, begin at the platform by the river and pull the red hover switch from the ground (next to a blue platform) upwards to activate the timer. Next, find a red switch to pull on top of each blue platform (land on the circle each time for easier access to the switch). Go in half a circle, as each platform you pull the switch on will raise the next platform to go to and do, until eventually you break the blue cage that is holding the Red Brick.

Price: The cost to buy this Red Brick is 5,000,000 studs.

Cheat Code: The code to enter for this Red Brick is ?

Where exactly to find the Invincibility Red Brick: It’s shown in this video guide with directions that lead to the red brick.

Red Brick 7: Minikit Detector

Lego Jurassic World Red Brick 7: Minikit Detector Location
Minikit Detector Red Brick Location #7: In the “Jurassic World” HUB’s middle-right side, in the East Boardwalk area’s Pachycephalosaurus Arena. In the Arena, use a Velociraptor’s strength to pull the wall-switch & then use a Dilophosaurus to spit on the 8 targets that appear in the audience

Description: This seventh Red Brick is called “Minikit Piece Detector” as it’ll point you to all minikit pieces in your general area with an on-screen arrow. A handy way to find all 10 in each level!

Location: You will find this red brick in the “Jurassic World” open world HUB area of Isla Nublar. Which is the left island on the map; you enter the correct area by selecting the blue Jurassic icon and traveling to the middle-right side of the map.

This is where you’ll find the East Boardwalk, from where you can enter the Pachycephalosaurus Arena through the yellow elevator up. Once in the arena, look on the walls below the audience (left from where you enter) to find a switch you can pull with a Velociraptor’s strength. Once you let go you’ll see 8 targets appear in the audience above, which you must spit on with the Dilophosaurus. Once that’s done you’ll automatically receive the Red Brick.

Price: The cost to buy this Red Brick is 200,000 studs.

Cheat Code: The code to enter for this Red Brick is ?

Where exactly to find the Minikit Detector Red Brick: It’s shown in this video guide with voice-over directions that lead to the red brick.

Red Brick 8: Red Brick Detector

Lego Jurassic World Red Brick 8: Red Brick Detector Location
Red Brick Detector Red Brick Location #8: In the “Jurassic Park 1” HUB’s right side, in the Tyrannosaurus Territory. Go to the blue Dino Call-In Pad to switch to a T-Rex and tear apart the nearby Red Brick-holding cage by pulling on the lever on the side

Description: This eight Red Brick is called “Red Brick Detector” as it’ll point you to all red bricks in your general area with an on-screen arrow. Or to be exact, it points you to the red brick challenge starting locations in the open world HUB areas. Very helpful!

Location: You will find this red brick in the “Jurassic Park 1” open world HUB area of Isla Nublar. Which is the left island on the map; you enter the correct area by selecting the yellow Jurassic icon and traveling to the right side of the map.

This is where you’ll find the Tyrannosaurus Territory. Go to the blue Dino Call-In Pad to switch to any large dinosaur like a Tyrannosaurus Rex or Indominus Rex. Close by you’ll see a cage you need to tear apart, located on the side of the area. Use the dino’s strength to pull the lever on the side of the large cage until it breaks and you can get to the Red Brick inside.

Price: The cost to buy this Red Brick is 200,000 studs.

Cheat Code: The code to enter for this Red Brick is ?

Where exactly to find the Red Brick Detector Red Brick: It’s shown in this video guide with voice-over directions that lead to the red brick.

Red Brick 9: Gold Brick Detector

Lego Jurassic World Red Brick 9: Gold Brick Detector Location
Gold Brick Detector Red Brick Location #9: In the “Jurassic Park 2: The Lost World” HUB’s center, in the Long Grass Territory. As a Velociraptor (Charlie) use its scent smelling ability opposite the blue Dino Call-In Pad to follow the green smoke scent to the dead end & dig into the ground

Description: This ninth Red Brick is called “Gold Brick Detector” as it’ll point you to all gold bricks in your general area with an on-screen arrow when you’re in the open world HUB areas. Quite helpful!

Location: You will find this red brick in the “Jurassic Park 2: The Lost World” open world HUB area of Isla Sorna. Which is the right island on the map; you enter the correct area by selecting the red The Lost World icon and traveling to the center of the map, to the right of the Communications Center.

This is the Long Grass Territory where you’ll need to switch to the Velociraptor (Charlie) to use its scent smelling ability in the area (it appears next to the blue Dino Call-In Pad). Look for a grey-green-ish smoke plume on the ground, then press the on-screen indicated action button and follow the green scent trail (from there towards the dead end) until you reach a digging spot where the Red Brick is hidden.

Price: The cost to buy this Red Brick is 200,000 studs.

Cheat Code: The code to enter for this Red Brick is ?

Where exactly to find the Gold Brick Detector Red Brick: It’s shown in this video guide with voice-over directions that lead to the red brick.

Red Brick 10: Amber Brick Detector

Lego Jurassic World Red Brick 10: Amber Brick Detector Location
Amber Brick Detector Red Brick Location #10: In the “Jurassic Park 3” HUB’s top-left side, in the Isla Sorna Aviary, at the Ankylosaurus Territory. Find Mother Ankylosaurus’ 3 missing eggs & return them to her nest. 2 are obvious but 1 egg is hidden in a destructible green plant

Description: This tenth Red Brick is called “Amber Brick Detector” as it’ll point you to all Amber Bricks to collect in your general area with an on-screen arrow. A handy way to find & pick them all up, one in each story level of the game.

Location: You will find this red brick in the “Jurassic Park 3” open world HUB area of Isla Sorna. Which is the right island on the map; you enter the correct area by selecting the red The Lost World icon and traveling to the top-left side of the map, at the Isla Sorna Aviary.

This is where you’ll find the Ankylosaurus Territory. Mother Ankylosaurus has lost 3 eggs, go find them all to get the Red Brick from her nest past the water stream. Return all 3 eggs back to her nest to unlock it: one egg is lying at the bottom of a tree, another one is hidden in a destructible green plant near said tree, and the last one is very close to the nest itself.

Price: The cost to buy this Red Brick is 200,000 studs.

Cheat Code: The code to enter for this Red Brick is ?

Where exactly to find the Amber Brick Detector Red Brick: It’s shown in this video guide with directions that lead to the red brick.

Red Brick 11: Fast Build

Lego Jurassic World Red Brick 11: Fast Build Location
Fast Build Red Brick Location #11: In the “Jurassic Park 3” HUB’s left side, in the Spinosaurus Territory. Find the rocks next to the fallen hollow trees & switch to or use the nearby Dino Call-In Pad to change to Compsognathus. It’s small enough to get into the hollow trees that lead to the Red Brick underneath

Description: This eleventh Red Brick is called “Fast Build” because it allows you to build objects out of Lego bricks super fast.

Location: You will find this red brick in the “Jurassic Park 3” open world HUB area of Isla Sorna. Which is the right island on the map; you enter the correct area by selecting the red The Lost World icon and traveling to the left side of the map.

This is where you’ll find the Spinosaurus Territory. Find the rocks next to the fallen rotten/hollow trees (and a dung pile) and switch to or use the nearby Dino Call-In Pad to change to Compsognathus. It’s small enough to get into the hollow trees that lead to the Red Brick under them.

Price: The cost to buy this Red Brick is 100,000 studs.

Cheat Code: The code to enter for this Red Brick is ?

Where exactly to find the Fast Build Red Brick: It’s shown in this video guide with voice-over directions that lead to the red brick.

Red Brick 12: Attract Studs

Lego Jurassic World Red Brick 12: Attract Studs Location
Attract Studs Red Brick Location #12: In the “Jurassic Park 1” HUB’s left side, in the Carnivore Territory enclosure. Find the 3 eggs Roy has lost & return them to the nest (next to Roy) to receive the Red Brick. Egg 1 is in an orange amber object you need a custom Troodon with T-Rex head to destroy with its scream. Egg 2 is hidden in destructible greenery/bamboo near the nest you can destroy with Owen Grady’s cutting. Egg 3 is on top of a tree stem, which a Velociraptor can pounce at the nearby electricity switch to destroy it, that in turn makes the 2 poles next to the tree electricity-free for Ellie Sattler (Survivor) to jump up on with agility to reach the egg

Description: This twelfth Red Brick is called “Attract Studs” because it pulls all studs around you directly to you.

Location: You will find this red brick in the “Jurassic Park 1” open world HUB area of Isla Nublar. Which is the left island on the map; you enter the correct area by selecting the yellow Jurassic icon and traveling to the left side of the map.

This is where you’ll find the Carnivore Territory. Go to the enclosure. Park Worker Roy has lost all the dino eggs, yet has plenty of time to make egg puns, so I guess it’s up to us to find them. – The below explanation may look complicated, but it’s really straightforward once you start doing it, I promise.

– Egg Location #1: Look for the yellow/orange amber object. You’ll need a large dino that can scream to break it, however this enclosure only allows medium to small dinosaurs inside. So you’ll need to have built a custom tiny dino that can scream at the Visitor Center’s DNA Lab, and then switch to this (for example) custom Troodon with Tyrannosaurus Rex head. – After the amber object has broken, pick up the left-behind egg and bring it to the dino egg nest next to Roy to drop it off.

– Egg Location #2: Next switch to Owen Grady with his Velociraptor claw cutting ability (or anyone with a knife). This will allow you to cut down the light-green bamboo-like plants with flowers. Find that green object near the nest and return the egg hiding in the greenery back to the nest.

– Egg Location #3: The last egg is up on a cut down tree’s stem at the border of the enclosure (near two electrified poles sticking out of the fence). Switch to a Velociraptor to pounce at the out of reach colored electricity switch attached to the fence (in front of the two electrified poles) to target and break it… which turns off the electricity on the poles. This allows you to use a female character with agility to swing from the poles up on the tree stem where the egg is on top. Switch to Ellie Sattler (Survivor) to grab the egg and carry it back to the nest. Drop it off in the nest to reveal the Red Brick inside the large egg.

Price: The cost to buy this Red Brick is 100,000 studs.

Cheat Code: The code to enter for this Red Brick is ?

Where exactly to find the Attract Studs Red Brick: It’s shown in this video guide with voice-over directions that lead to the red brick.

Red Brick 13: Collect Ghost Studs

Lego Jurassic World Red Brick 13: Collect Ghost Studs Location
Collect Ghost Studs Red Brick Location #13: In the “Jurassic World” HUB’s middle. From the West Boardwalk go to the T-Rex observatory. Find a blue access panel & enter security code as Claire Dearing or Mr. DNA. Take the elevator down into the arena & switch to Barry to shoot the blue wall-target with his electric rifle to make a T-Rex appear. Go to & switch to the T-Rex to bite through the strength lock near the rocks. As any character jump up the rocks, break the bush to build a trampoline to get to the ladder that leads to the Red Brick

Description: This thirteenth Red Brick is called “Collect Ghost Studs” because that’s what it enables you to do. These are the blue studs on the ground that normally have no value and only point you to the next level from where ever you are in the open world HUB areas. – You activate the ghost studs directions-trail from any info kiosk.

Location: You will find this red brick in the “Jurassic World” open world HUB area of Isla Nublar. Which is the left island on the map; you enter the correct area by selecting the blue Jurassic icon and traveling to the middle of the map.

This is where you’ll find the West Boardwalk. From there walk into the Tyrannosaurus Rex observatory. Once inside, walk up to the blue panel next to the red Tyrannosaurus Rex spelling sign and enter the panel’s security code using any character who can use Jurassic World access panels like Claire Dearing or Mr. DNA. An elevator down into the T-Rex observatory will come up, all you need to do to get on it is smash through the STOP-sign roadblock and go down into the arena.

Once in the arena, switch to Barry with his electric rifle that can shoot the blue diamond-shaped target that came up (on the wall near where the elevator goes down). Shooting it will open up the T-Rex doors to let him in. Now walk up to & switch to the T-Rex and use its strength bite to break the grey & red colored strength lock that’s blocking your access to the rock-stairs (to the left of the T-Rex entrance door). Now switch to a character to jump up the rocks by following the studs trail until you can’t go further up, then smash the Lego bush object and use the fallen parts to build a trampoline to jump up to the stairs. Take the stairs up and grab the Red Brick up top.

Price: The cost to buy this Red Brick is 100,000 studs.

Cheat Code: The code to enter for this Red Brick is ?

Where exactly to find the Collect Ghost Studs Red Brick: It’s shown in this video guide with voice-over directions that lead to the red brick.

Red Brick 14: Compy Mode

Lego Jurassic World Red Brick 14: Compy Mode Location
Compy Mode Red Brick Location #14: In the “Jurassic World” HUB’s middle, in the Mosasaurus Arena. Take the elevator down to the underwater glass observatory. Use Dino Call-In Pad to switch to Mosasaurus & use its roar to break 3 orange amber rocks to get a Red Brick

Description: This fourteenth Red Brick is called “Compy Mode” because when you turn on this Red Brick all of the characters become small size like the Compsognathus (AKA Compy) dinosaurs! Which, like Mini Characters, actually allows you to access the areas that only miniature characters can normally access.

Location: You will find this red brick in the “Jurassic World” open world HUB area of Isla Nublar. Which is the left island on the map; you enter the correct area by selecting the blue Jurassic icon and traveling to the middle of the map.

This is where you can travel to the Mosasaurus Arena area. After walking inside and taking the elevator down to the underwater glass observatory, walk up to the Dino Call-In Pad to switch to the giant Mosasaurus. Swim up to the yellow/orange amber rock objects and break all 3 with its roar ability to automatically receive the Red Brick.

Price: The cost to buy this Red Brick is 100,000 studs.

Cheat Code: The code to enter for this Red Brick is ?

Where exactly to find the Compy Mode Red Brick: It’s shown in this video guide with directions that lead to the red brick.

Red Brick 15: Destroy On Contact

Lego Jurassic World Red Brick 15: Destroy On Contact Location
Destroy On Contact Red Brick Location #15: In the “Jurassic World” HUB’s middle, on the Safari Plains. Follow the path that leads under a small bridge to building with red & white colored bricks on the front (a rolled up sunscreen). Switch to a strength pull dino like a Velociraptor to pull the lever on the left side of the building that lowers the sunscreen. Don’t let go of the lever & switch to a character to jump on the sunscreen & then roof to get the Red Brick on top

Description: This fifteenth Red Brick is called “Destroy On Contact” because that’s what it enables you to do. Merely walking into Lego objects will cause them to be destroyed.

Location: You will find this red brick in the “Jurassic World” open world HUB area of Isla Nublar. Which is the left island on the map; you enter the correct area by selecting the blue Jurassic icon and traveling to the middle of the map.

This is where you can travel to the Safari Plains area. In this large area follow the path that leads you under a small bridge and leads to a small building with red & white colored bricks on the front (which later turns out to be a sunscreen). Switch to a dinosaur that has strength pull like a Velociraptor and go stand on the interaction icon on the left side of the building to pull out the lever, which lowers the sunscreen. Don’t let go of the pulled-out lever and immediately switch to a character to jump on the sunscreen (Ellie Sattler can jump high) and then jump on the building’s roof to grab the Red Brick.

Price: The cost to buy this Red Brick is 100,000 studs.

Cheat Code: The code to enter for this Red Brick is ?

Where exactly to find the Destroy On Contact Red Brick: It’s shown in this video guide with directions that lead to the red brick.

Red Brick 16: 8-Bit Music

Lego Jurassic World Red Brick 16: 8-Bit Music Location
8-Bit Music Red Brick Location #16: In the “Jurassic Park 1” HUB’s top side, in the Dilophosaurus Territory. Switch to a Pachycephalosaurus to headbutt into the fallen tree log. In the opened up section, switch to the Dilophosaurus to use its spit ability to destroy the black rock with a green glow. Water the stem of the resulting plant with Ellie Sattler (Survivor)’s watering ability to make it grow into a flower with the Red Brick on top

Description: This sixteenth Red Brick is called “8-Bit Music” as that’s exactly what your game gets when you turn it on; The background music changes into a retro gaming 8-bit style. – This type of music was commonplace in the third / 8-bit generation of video game consoles in the 1980’s; heard in Nintendo NES, Sega Master System & Atari 7800 games.

Location: You will find this red brick in the “Jurassic Park 1” open world HUB area of Isla Nublar. Which is the left island on the map; you enter the correct area by selecting the yellow Jurassic icon and traveling to the top side of the map.

This is where you’ll find the Dilophosaurus Territory. Inside switch to a Pachycephalosaurus with its headbutt strength ability to run with his head into the tree log lying on the ground, with the orange glow in the middle of the log as your target). Which will free up some extra space in the Dilophosaurus pen. Go to this new area.

Now switch to the Dilophosaurus to use its spit ability to crack open the black rock (with a green glow) lying in that new area. This will reveal the stem of a plant. Switch to a character that can water plants like Ellie Sattler (Survivor) to make the green plant grow into a beautiful flower with the Red Brick on top. Jump up to collect it.

Price: The cost to buy this Red Brick is 100,000 studs.

Cheat Code: The code to enter for this Red Brick is ?

Where exactly to find the 8-bit Music Red Brick: It’s shown in this video guide with voice-over directions that lead to the red brick.

Red Brick 17: Nedry Disguises

Lego Jurassic World Red Brick 17: Nedry Disguises Location
Nedry Disguises Red Brick Location #17: In the “Jurassic Park 1” HUB’s top-right side, in the Triceratops Territory. Go to the back of the reserve to find a house with a Triceratops in it. Talk to the veterinarian, destroy the crates around the house & from their parts build a computer. Switch to Lex Murphy who can hack it to X-ray the dino & declare it healthy, rewarding you with a Red Brick

Description: This seventeenth Red Brick is called “Nedry Disguises” because it’ll put bright colored Hawaiian shirts & shorts on all on-screen characters.

Location: You will find this red brick in the “Jurassic Park 1” open world HUB area of Isla Nublar. Which is the left island on the map; you enter the correct area by selecting the yellow Jurassic icon and traveling to the top-right side of the map.

This is where you’ll find the Triceratops Territory. Travel all the way to the back to the house with the sick Triceratops next to it that has another Triceratops standing in it. Talk to the female veterinarian and then you’ll be able to destroy the crates around the house and build the loose Lego pieces you get from this into a computer that can X-ray the Triceratops to find out why/if it’s sick so you can heal it.

To operate the X-ray computer, you’ll have to use a hacker character like Lex Murphy who can hack computer systems. Once activated, point the X-ray scanner’s mouse cursor from the head to the hind legs to its main body and click on each part to turn it all green. Now that you’ve declared the Triceratops healthy, this will make the Red Brick appear in front of the Triceratops, as a reward for your help.

Price: The cost to buy this Red Brick is 100,000 studs.

Cheat Code: The code to enter for this Red Brick is ?

Where exactly to find the Nedry Disguises Red Brick: It’s shown in this video guide with voice-over directions that lead to the red brick.

Red Brick 18: Fast Interact

Lego Jurassic World Red Brick 18: Fast Interact Location
Fast Interact Red Brick Location #18: In the “Jurassic World” HUB’s middle, in the Gyrosphere Valley. Follow the valley past the Stegosaurus and Gallimimus dinos until you see an orange amber object on the side of a rock plateau. 1st Break the black rock on top with a Dilophosaurus spit attack to make the Red Brick appear. 2nd Break the amber object with a T-Rex roar & from the Lego object remains that fall build a handlebar. 3rd Use a Velociraptor air leap to reach the handlebar & jump on top to the Red Brick

Description: This eighteenth Red Brick is called “Fast Interact” as that’s exactly what your character gets when you turn it on, the ability to interact much faster with control panels.

Location: You will find this red brick in the “Jurassic World” open world HUB area of Isla Nublar. Which is the left island on the map; you enter the correct area by selecting the blue Jurassic icon and traveling to the middle of the map.

This is where you can travel to the Gyrosphere Valley area. Go to the Vehicle Call-In Point there and use a Gyrosphere to follow the valley past the Stegosaurus and Gallimimus dinos, until you reach the yellow/orange colored amber object stuck to the side of a rock plateau with someone on top. To break the black rock object (with a green glow) see on top of the rock plateau, you’ll need to do a Dilophosaurus spit attack on it from the ground in front of it (you may need to heal the sick dino on the nearby Dino Call-In Pad first).

In order to break the amber object (to get to the now-appeared Red Brick) you’ll need a dino with a screaming ability like the Tyrannosaurus Rex. Then from the destroyed object’s remains that fall on the ground build a handlebar AKA raptor railing on the side of the rock plateau. Finally, switch to a dino that can leap to Lego objects such as the Velociraptor, this will get you up on the rock plateau to pick up the Red Brick.

Price: The cost to buy this Red Brick is 100,000 studs.

Cheat Code: The code to enter for this Red Brick is ?

Where exactly to find the Fast Interact Red Brick: It’s shown in this video guide with voice-over directions that lead to the red brick.

Red Brick 19: Hybrid Disguises

Lego Jurassic World Red Brick 19: Hybrid Disguises Location
Hybrid Disguises Red Brick Location #19: In the “Jurassic Park 1” HUB’s middle, in the Gallimimus Territory. Go to Warren’s automatic dino feeder & break the crate in front of it to use its parts to build a handlebar lever. Switch to a Velociraptor to pull out the lever, hold it & immediately switch to a character to turn the rotating lever on the machine’s right side, once you wound it up switch back to the Velociraptor to let go of the lever. Repeat this process 3 times to get the Red Brick

Description: This nineteenth Red Brick is called “Hybrid Disguises” as it dresses all on-screen characters in full-on dinosaur costumes.

Location: You will find this red brick in the “Jurassic Park 1” open world HUB area of Isla Nublar. Which is the left island on the map; you enter the correct area by selecting the yellow Jurassic icon and traveling to the middle of the map.

This is where you’ll find the Gallimimus Territory. Go to Warren’s automatic dino feeder and break the crate in front of it, then from the destroyed object’s remains that lie on the ground build a handlebar lever AKA raptor railing on the front of the feeder.

Switch to a dinosaur that has strength pull like a Velociraptor and go stand on the interaction icon in front of it to pull out the lever, which makes a rotating lever appear on the right side of the feeder machine. Don’t let go of the pulled-out lever and immediately switch to a character to walk to the right and start turning the rotating lever, which will wind up the feeder machine, then switch back to the Velociraptor and let go of the lever. – Repeat this process 3 times and aside from studs the machine will also give you a Red Brick.

Price: The cost to buy this Red Brick is 100,000 studs.

Cheat Code: The code to enter for this Red Brick is ?

Where exactly to find the Hybrid Disguises Red Brick: It’s shown in this video guide with voice-over directions that lead to the red brick.

Red Brick 20: Helium Voices

Lego Jurassic World Red Brick 20: Helium Voices Location
Helium Voices Red Brick Location #20: In the “Jurassic Park 2: The Lost World” HUB’s center, in the Stegosaurus Territory. Switch to the headbutting Pachycephalosaurus to destroy 5 grey cracked walls on a timer. After you press the attack button/key in front of the 1st wall, quickly press & hold the same attack command to run to the next 2 walls & destroy them as you run. Then jump on the rock plateau using the red mushroom launcher to rush to the final 2 walls. The final Red Brick is in the last wall

Description: This twentieth Red Brick is called “Helium Voices” since it will give all voices in the game the effect of inhaling the gas from a helium balloon. Everyone will have incredibly high-pitched funny voices, haha! 😆

Location: You will find this red brick in the “Jurassic Park 2: The Lost World” open world HUB area of Isla Sorna. Which is the right island on the map; you enter the correct area by selecting the red The Lost World icon and traveling to the center of the map, to the far right of the Communications Center.

This is where you’ll find the Stegosaurus Territory area to travel to. You’ll know you’re in the right spot when you see 5 grey walls with cracks in them that have an orange glow, although only 3 are where you’re walking. This means you’ll need a headbutting dino, the Pachycephalosaurus, to destroy all 5 walls in rapid succession. After pressing the attack button/key that appears when you stand in front of the first wall, you’ll see a timer appear on-screen. Quickly press the same attack button/key after to initiate a run to the second and third wall (which you’ll destroy right away since you’re already holding the attack command). Note: If the Stegosaurus is in the way, you may want to free it first to clear the road in between walls.

The last 2 walls may require some practice, since they are up on a rock plateau that you can only reach by carefully jumping with your dino on the red mushrooms that launches you up there. To reach the very last wall in time, you’ll need to run as well.

Price: The cost to buy this Red Brick is 100,000 studs.

Cheat Code: The code to enter for this Red Brick is ?

Where exactly to find the Helium Voices Red Brick: It’s shown in this video guide with voice-over directions that lead to the red brick.

Thanks to TT Games, Joseph, Trophygamers, Packattack, GamingSpite & ShockblastMedia’s Jay for the red brick tips.

If you have any questions or know of new Lego Jurassic World Red Brick locations, please post them below! – Thanks for visiting!